设备介绍：
Equipment introduction:
1、应用：真空热合机是一款集热转印、真空热表、真空热合于一体的设备。
1: application: vacuum heat sealing machine is a collection of heat transfer, vacuum heat meter, vacuum heat in one of the equipment.
2、适用材料范围：珠光、拉丝等系列预涂金属板材及各种预涂金属型材，预处理的石材、陶瓷玻璃、水晶、竹木、化纤及棉麻布料、皮革、相册、相框等。
2, applicable range of materials: Pearl, drawing and other series of pre coated metal plates and a variety of pre coated metal profiles, pretreatment of stone, ceramic glass, crystal, wood, chemical fiber and cotton cloth, leather, photo album, etc..
机器特点：
Machine features:
高效节能：缩短机器的预热时间提高了工作效率，通过密闭保温箱体内的加热系统，可在10~20分钟内达到设定要求温度。箱体内温度均匀，料台进出温差小补温快，热量损失少节约能源消耗，大大提高了产品的质量和效果。
High efficiency and energy saving: shorten the warm-up time of the machine, improve the work efficiency. Through the heating system in the sealed incubator, it can reach the set requirement temperature within 10~20 minutes. The utility model has the advantages of uniform temperature in the box body, small temperature difference between the inlet and the outlet of the material box, fast warming up, less heat loss and energy consumption, and greatly improves the quality and effect of the product.
降低成本：省去了空压机、液压系统等附属设施，减少投资成本。无论料台进出保温箱体始终可以密闭，降低热量损失热效利用率高从而降低生产成本。
Reduce costs: eliminating the air compressor, hydraulic systems and other ancillary facilities to reduce investment costs. No matter the material inlet and outlet, the thermal insulation box can always be closed, and the heat loss is reduced, and the heat utilization rate is high, so as to reduce the production cost.
绿色环保：本机采用电加热密闭箱体内操作，生产过程不产生废气等其他污染。高耐用真空泵及静音导轨的使用使其工作时减小震动降低噪音。
Green environmental protection: This machine adopts electric heating airtight box in vivo operation, the production process does not produce waste gas and other pollution. The use of high vacuum pumps and silent guide rails reduces vibration and reduces noise during operation.
经久耐用：本机采用进口高弹力硅胶基层的弹力膜，双面经涂覆耐高温硅胶、氟橡胶等复合涂层，保持弹力的同时增强高温下抗老化及还原性，适合于高温环境下连续生产。
Durable elastic membrane: This machine adopts imported high elastic silicone rubber base, double-sided coated high temperature resistant silicone, fluorine rubber composite coating, maintain the elasticity and enhance high temperature aging and reduction, suitable for high temperature environment under continuous production.
适用性广、竞争力强：传统的设备无法印制中空、异型、凸起、凹陷、转角等立体特殊工件，本机采用的高弹力真空膜，通过形成真空负压可以实现对异形工件的密实包覆贴合，使异型立体工件的各个面均能得到良好的转印、热合、热裱效果。
Wide applicability, strong competitiveness: the traditional equipment can not be printed, hollow shaped, convex, sag, rotation of three-dimensional special workpiece, the machine adopts high elastic vacuum membrane, by forming a vacuum can be achieved on the special-shaped workpiece coated dense, each shaped part surface can be good, heat transfer hot laminating effects.
主要技术参数：
Main technical parameters:
1、外形尺寸： 239cm*130cm*112cm/.
1, size: 239cm*130cm*112cm/.
2、工作电压（V/HZ)220/50/
2, work voltage (V/HZ) 220/50/
3、设备重量：150kg
3, equipment weight: 150kg
4、额定功率：7KW
4, rated power: 7KW
5、温度范围：0-200度
5, temperature range: 0-200 degrees
6、极限真空（Mpa)0.1
6, limit vacuum (Mpa) 0.1
7、预热时间：10Min
7, preheating time: 10Min
8、进料高度：80mm
8, feed height: 80mm