工作原理：

Working principle：

工作时，热合头上的一对高频电极，对管路进行高频感应（PVC高频电场下分子极化）加热，使管路达到熔融状态，同时热合电极压紧熔融部分，按预设的程序，到达设定时间后，完成一次热合。

At work, a pair of high frequency electrodes on the hot metal head is used to heat the pipeline with high frequency induction (molecular polarization under the high frequency electric field of PVC), which makes the pipeline reach the melting state. At the same time, the hot metal electrode compacts the molten part and completes a heat coincidence after the setting time is reached according to the preset procedure.

产品特点及优势：

Product features and advantages:

1、智能化程度高，自动调节热合时间。

1, high degree of intelligence, automatic adjustment of heating time.

2、采用晶体管高频发生器，高频辐射微弱，有安全、可靠、寿命长优点。

2, using transistor high-frequency generator, high frequency radiation is weak, and has the advantages of safety, reliability and long life.

3、中文显示界面，直观显示操作过程、热合次数。

3, the Chinese display interface, intuitive display operation process, thermal contact times.

技术参数：

Technical parameters:

1.工作条件：环境温度：15℃～30℃。（热合机的使用，必须在其要求的环境温度下，即15℃～30℃。当温度低于15℃时热合效果不能达到最佳热合效果，当温度低于12℃时热合机不能正常工作。）相对湿度：不大于80%；   大气压力：70kpa～106kpa；电源：220V±22V   50Hz±1Hz

1. working conditions: ambient temperature: 15 to 30 degrees C. The use of heat exchanger must be 15 ~ 30 C at the required ambient temperature. When the temperature is less than 15 degrees, the effect of heat integration can not achieve the best heating effect. When the temperature is lower than 12 degrees, the heat exchanger does not work properly. Relative humidity: no more than 80%; atmospheric pressure: 70kpa to 106kpa; power supply: 220V + 22V 50Hz + 1Hz.

2.工作参数：射频输出：频率40.68MHz±10KHz；功率＜100W； 热合时间：＜4S； 热合管路直径：4.6mm～5.1mm

2., working parameters: RF output: frequency 40.68MHz + 10KHz; power less than 100W; heating time: < 4S; heat pipe diameter: 4.6mm ~ 5.1mm.

3.物理尺寸及重量：外型尺寸：340*225*185mm；包装尺寸：400*295*250mm；重量：毛重7.0kg；净重6.0kg

3. the physical size and weight: the outer dimension is 340*225*185mm, the packing size is 400*295*250mm, the weight is gross weight 7.0kg, and the net weight is 6.0kg.

台式进口热合机

Table type imported heat combination machine

产品型号：WG-RHJ-Ⅵ型

Product model: WG-RHJ- VI

主要适用场所：用于医用PVC导管热合。适用场所：各级血站体采科和成分科、医院输血科及血库、生物和医疗科研等单位。

Main application area: used for medical PVC catheter thermal integration. Suitable places: all levels of blood stations, Department of physical education, Department of pharmacy, Department of blood transfusion, blood bank, biological and medical research units.

产品特点及优势

Product features and advantages

1，热合过程全自动

1, the heat fusion process is fully automatic

2，热合过程只需1秒

2, the heating process is only one second

3，防溅设计，保护操作者

3, anti splashing design, protection operator

4，异常情况声光报警

4, abnormally acousto-optic alarm

5，射频能量自动调节功能

5, radio frequency energy automatic regulation function

6，可选配热合手柄，提高工作灵活性

6, optional heat combined handle to improve working flexibility

技术参数：

Technical parameters:

使用环境：温度：10℃～40℃，湿度：10～90%RH。

Usage environment: temperature: 10 ~ 40 ~ C, humidity: 10 ~ 90%RH.

大气压力：70kpa～106kpa；电源：220VAC±10%， 50Hz±10%

The atmospheric pressure is 70kpa to 106kpa, and the power supply is 220VAC + 10%, 50Hz + 10%.