联系我们

公司名称:XXX

电话:XXX

手机:XXX

联系人:XXX

地址:XXX

新闻动态
高频塑料热合机打火现象
高频塑料热合机打火现象
The Fire Phenomenon of High Frequency Plastic Hot-closing Machine
1、 模具水平调整的不够水平。容易导致打火。
1. Insufficient level of die level adjustment. Easy to cause fire.
2、 在热合过程中高频电流调至的过大,容易使模具吃火现象。
2. It is easy to cause the die to eat fire when the high frequency current is too large during the hot-bonding process.
3、 模具打火后没有采用适当的办法处理高频模具跳火留下的灰尘和黑点。
3. There is no proper method to deal with the dust and black spots left by the high frequency die after the fire.
4、 高频上模,模具还没有完全和下模模具接触就开始发射高频机电流。
4. High-frequency upper die, the high-frequency motor current is emitted before the die is fully contacted with the lower die.
5、 高频模具表面的绝缘材料没有得到适当的处理
5. The insulating material on the surface of High Frequency die has not been properly treated.

联系方式

  1. 公司名称:XXX
  2. 电话:XXX
  3. 手机:XXX
  4. 联系人:XXX
  5. 地址:XXX

版权 © 河北高频热合机厂 网址:http://reheji.89ix.com  推荐:高频热合机,高频塑料热合机,高频塑料焊接热合机

网站建设及优化保定遨游网络公司