| 高频塑料热合机打火现象 |
| 添加时间：2019/9/2 16:46:56 浏览次数： |
| 高频塑料热合机打火现象 The Fire Phenomenon of High Frequency Plastic Hot-closing Machine 1、 模具水平调整的不够水平。容易导致打火。 1. Insufficient level of die level adjustment. Easy to cause fire. 2、 在热合过程中高频电流调至的过大，容易使模具吃火现象。 2. It is easy to cause the die to eat fire when the high frequency current is too large during the hot-bonding process. 3、 模具打火后没有采用适当的办法处理高频模具跳火留下的灰尘和黑点。 3. There is no proper method to deal with the dust and black spots left by the high frequency die after the fire. 4、 高频上模，模具还没有完全和下模模具接触就开始发射高频机电流。 4. High-frequency upper die, the high-frequency motor current is emitted before the die is fully contacted with the lower die. 5、 高频模具表面的结缘材料没有得到适当的处理 5. The bonding material on the surface of High Frequency die has not been properly treated. |
| 上一页 生产中出现的各种打火现象处理 |
| 下一页 高频热合机的原理 |
Copyright © 技术支持：遨游网络