| 高频塑料热合机打火现象 |
| 添加时间：2020/1/9 16:38:18 浏览次数： |
| 高频塑料热合机打火现象 Ignition phenomenon of high frequency plastic heat sealing machine 1、 模具水平调整的不够水平。容易导致打火。 1. Mold level adjustment is not level enough. It is easy to cause a fire. 2、 在热合过程中高频电流调至的过大，容易使模具吃火现象。 2. In the process of heat closing, the high-frequency current is adjusted too much, which is easy to make the mould misfire. 3、 模具打火后没有采用适当的办法处理高频模具跳火留下的灰尘和黑点。 3. The dust and black spots left by the high frequency die jumping are not treated properly after the die is ignited. 4、 高频上模，模具还没有完全和下模模具接触就开始发射高频机电流。 4. High frequency on the mold, the mold has not fully contact with the lower mold began to emit high frequency machine current. 5、 高频模具表面的结缘材料没有得到适当的处理 5. The bonding material on the surface of High Frequency die has not been properly treated |
| 上一页 生产中出现的各种打火现象处理 |
| 下一页 高周波塑料熔接机的工作原理 |
Copyright © 技术支持：遨游网络