高频塑料热合机生产中防止打火 |
添加时间:2020/8/21 16:18:19 浏览次数: |
高频塑料热合机生产中防止打火 Prevention of ignition in production of high frequency plastic heat sealing machine 1、 高频机打火现象的避免不掉的,因为它是采用电磁波原理,只能说打火的频率降至到最低点,主要跟材料有很大关系,材料的材质好不容易出现打火现象。 1. High frequency machine ignition phenomenon can not be avoided, because it is based on the principle of electromagnetic wave, can only say that the frequency of ignition to the lowest point, mainly related to the material, the material is not easy to spark phenomenon. 2、 高频机在生产过程中需要经常进行振荡桶的清理干净,只需要采用空气压缩机吹吹就可以。 2. In the production process of high-frequency machine, it is necessary to clean the oscillation barrel frequently, and only need to use air compressor to blow. 3、 高频机在针对模具是因根据材料的特性选择相应的绝缘材料。市场常见的绝缘材料有:绝缘纸、四氟、高温布、高温胶带、硅胶、牛皮纸、黄蜡纸等绝缘材料。 3. High frequency machine in the mold is based on the characteristics of the material to select the appropriate insulation material. The common insulating materials in the market are: insulating paper, tetrafluoroethylene, high temperature cloth, high temperature tape, silica gel, kraft paper, waxed paper and other insulating materials. 4、 高频机在适用过程中高频电流的稳定性能相当重要,电流不稳的高频机在生产过程中就会屡屡出现打火现象。 4. In the process of application, the stability of high frequency current is very important. If the current is unstable, the high-frequency machine will often appear the phenomenon of ignition in the production process. 5、 高频机设备需要安装采用闸流管保护,能截断高频机电流过大,从而引起的打火现象。 5. High frequency machine equipment needs to be installed with thyristor protection, which can cut off the high-frequency electromechanical flow, resulting in ignition phenomenon. |
上一页 没有了 |
下一页 高频热合机焊接方式 |
Copyright © 技术支持:遨游网络